Skip to main content

The Manual may earn a commission when you buy through links on our site.

How to tune up your motorcycle for your upcoming road trips

Prepare your motorcycle for unforgettable road trips with these tips

Man working on a motorcycle
Gstockstudio / Adobe Stock

Good news, fellow bikers! Summer has finally arrived, and it’s time to tune up your poor, neglected motorcycle for the open road. A tune-up entails doing extensive maintenance of your motorbike to see if its components are in top working condition, or if they need to be replaced or cleaned.

Sure, you could just ask your local mechanic to do everything, but it’s more rewarding to do the work yourself. You’ll save money, too. Besides, a motorcycle tune-up is not that hard once you have the basics down. Here’s everything you need to know about tuning up your motorcycle for your upcoming road trip plans.

Hand of a mechanic holding a wrench in workshop.
Rjan Kovsky/Adobe Stock

Prepare your tools

A tune-up shouldn’t require any specialized multitools. But there are a few things you’ll need to get the job done. They are: A set of wrenches and sockets (including a spark plug socket), screwdrivers, Allen keys, and pliers.

Stanley’s 210-piece tool set contains everything you need for a motorcycle tune-up, from screwdrivers to drive sockets and ratchet.  Other helpful gear includes a battery tender or trickle charger, WD-40, motor oil, rags, an old toothbrush, brake fluid, new spark plugs, chain lubricant, and carburetor cleaner. We suggest getting the Oumers Brush Kit if you want a dedicated cleaning kit for chain maintenance.

Close-up of hand with yellow gloves on motorcycle handlebar
Westend61/Adobe Stock

Check the brakes and fluid levels

One of the first steps in prepping your bike for your road trip is to check all the fluid levels. Even if you have enough oil in the system, now is a good time to change the oil and replace the oil filter.

You’ll also want to bleed the brakes and refill the system with new brake fluid. As you’re doing this, check the brake lines for any cracks or other wear and check the brake pads to ensure they still have some meat on them. If not, order replacements. Anything that doesn’t look 100%, replace it you can never be too careful with brakes. Lastly, you’ll need to replace the fuel filter to keep out any debris that may have formed in the tank over the last few months. And add fresh gas.

An installation of the motorbike battery
Philip Image/Adobe Stock

Hit with a charge

Take the battery out of the bike and check for any white powder. If you find any, you likely need to replace the battery. If not, hook it up to your tender or trickle charger, such as this safe, easy-to-use battery charger from Battery Tender. Once you’re done charging the battery, slap it back in the bike.

Mechanic man checking a spark plug of vintage motorcycle.
Kamonrat/Adobe Stock

Spark it up

Next, you’ll want to use a reliable spark tester like the user-friendly Ram-Pro Inline Spark Tester to check your spark plugs for any wear and tear. If the electrodes (the part that shoots the spark, at the tip) are dirty, you will want to replace the spark plugs with new ones. When reinstalling your spark plugs, make sure to not over-tighten, which may damage the engine.

A close-up photo of a motorcycle
Arteum/Unsplash

Mind the chain

Press on your chain to check the tension. If it’s too loose, you can likely adjust the tension with the wheel adjusters (see this video to learn how to do it). Also, check the chain for rust and dirt. If it’s dirty, spray the chain with WD-40 and let it soak in for a few minutes. Next, spray a firm bristled toothbrush with WD-40 and scrub down the chain until it’s clean.

Once you’re finished, lube up the chain with a high-quality lubricant, which you should be able to buy at most auto stores. We recommend Amazon’s Maxima Chain Max since it is infused with anti-wear additives to help ensure your chain’s longevity.

Close up image of a motorcycle tire
Hans Ripa/Unsplash

Inspect the tires

Don’t forget to check your tires for any cracks or flat spots that may have formed over the last few months. The Slime Tire Plug Kit comes with five plug strings, a T-handle plugger, and other essentials for patching up tire punctures. Once everything looks good, check the tire pressure and fill or reduce the pressure as needed. If the pressure isn’t right, you’re going to need new tires your best bet is to take your wheels to the shop. After you’ve checked the essentials, and topped off the gas and other fluids, give your hog a start. If you have an older bike that struggles to start, you can spray carburetor cleaner or starter fluid into the carbs. And if that doesn’t work, you may need to get some professional help.

Harley Davidson motorcycle rider
Harley-Davidson / Unsplash

Listen to the engine

Before you embark on a road trip, we recommend you ride your motorcycle around your neighborhood for at least a half hour so you could identify any potential problems in your engine. If you hear any knocking, hissing, or ticking sound while riding your motorcycle, it could be a sign that something is wrong with your engine. You should also check if too much smoke is coming out of the exhaust or if the engine is struggling to accelerate.

Basically, you need to fix anything that seems off on your motorcycle before the road trip, or else it would become a bigger problem down the road. If you can’t identify the cause of the problem, you can use a diagnostic tool if it’s available for your motorcycle. Alternatively, you can take your motorcycle to a mechanic for an inspection.

Editors' Recommendations

Topics
Nate Swanner
Former Digital Trends Contributor
Nate is General Manager for all not-Digital-Trends properties at DTMG, including The Manual, Digital Trends en Espanol…
Check engine, tire pressure, and more: The most common car warning lights explained
Here's a breakdown of what your car is telling you
Car warning light on a vehicle dashboard.

Depending on what you drive (and how well you take care of it), your car may have anywhere between zero and half a dozen different car warning lights on the dash at any given time. They're all trying to tell you something, and some are more urgent than others.

Dashboard warning lights that you need to understand
If you've got a new light on your dash (or have been driving around with one for longer than you care to admit), you're in the right place. Below, we'll break down all the most common warning lights in a car that you'll see from behind the wheel, what they mean, and how to get them off your dash.
Check engine/service engine light
Ah yes, the dreaded check engine light. For many of us, the check engine light feels like a probable death sentence for our cars, but truth be told, it's not always a big deal. Your car flashes the check engine light any time something's wrong with any part of your engine or emissions system.

Read more
Follow these car tire maintenance tips for long-lasting tires
This is how you can keep your tires in good condition
Front left golden wheel on a yellow Lamborghini

The car tires are often the most overlooked part of a vehicle. Despite being tasked with literally keeping your car on the road, most owners pay more attention to a car’s engine, fluids, or brakes. Without tires, your car wouldn’t be able to get down the road, making them just as important as gas and oil. Just like any other part of your car, tires need to be maintained. Luckily, tire maintenance is a DIY process that’s easy to do and can help you avoid tire repair service.

If you’re the kind of person who changes your car’s oil, then you’ll probably have all the tools you need to maintain your car’s tires. Gather them after organizing your garage. You’ll want to get into a habit of regularly checking your car’s tires. Whether it’s after every car wash or every season, maintaining your car’s tires helps keep you on the road and out of a ditch.

Read more
Car repairs guide: This is what those strange noises your car is making mean
Is you car rattling, squealing or squeaking?
2025 Toyota Camry hybrid engine.

Car repairs and their associated costs are one of day-to-day life’s biggest annoyances. Out of nowhere, you can find your savings account or credit card hit for thousands of dollars as you attempt to keep your daily driver on the road. While many issues are flagged by warning lights, some can fly under the radar for a while. Then, all of a sudden, you hear a squealing noise while driving or a ticking engine noise and know something’s off.

Proper maintenance can help minimize the number of issues you experience, but it can’t eliminate them completely. Luckily there are other indicators that something might be wrong, including some telltale sounds. Here are a few of the more common noises a vehicle may make and what said noises might indicate. Quickly identifying problems and fixing them early can save you money and keep you safe, so remember to keep an ear out if you want to spot potential car issues.

Read more